HP HP3-C29 Dumps

Exam: HP LaserJet Enterprise M4555 MFP

Play HP HP3-C29 VCE files with Avanset VCE Simulator
 

HP HP3-C29 Exam Tutorial

Showing 1-20 of 25 Questions   (Page 1 out of 2)


Question No : 1

You have powered on the HP LaserJet Enterprise M4555 MFP after replacing the
encrypted hard drive, but the product will not boot up to a Ready state What is the first
thing you should do?

A. Replace the encrypted hard drive again
B. Run a Cold Reset from the pre-boot menu
C. Remove and replace the formatter board
D. Verify that the latest firmware has been downloaded on the replacement hard drive


Question No : 2

The HP Universal Print Driver (UPD) can be installed in which modes?

A. Discrete or universal mode
B. Stationary or mobile mode
C. Traditional or dynamic mode
D. Specific or generic mode


Question No : 3

On the HP LaserJet Enterprise M4555 MFR firmware is stored on which component(s)?

A. The encrypted hard disk or solid state drive
B. DIMM memory
C. The DC Controller and the ICB
D. The formatter


Question No : 4

Which of the HP LaserJet Enterprise M4555 MFP bundles does NOT feature automatic
duplexing?

A. HP M4555
B. HP M4555F
C. HP M4555LN
D. HP M4555SKM


Question No : 5

The HP LaserJet Enterprise M4555 MFP allows for how much memory expansion through
available DIMM slots on the formatter?

A. 16MB
B. 64MB
C. 256MB
D. 1280 MB


Question No : 6

Which feature allows the fuser in the HP LaserJet Enterprise M4555 MFP to heat up to
optimum temperature from Sleep mode almost immediately?

A. A quick-heating ceramic element is used instead of a lamp.
B. Reflective shielding is installed, which reduces the amount of heat that is wasted.
C. The dual-element corona wire uses both elements for quick heating, and then resumes single-element use for fusing.
D. A reduced-capacity heating charge is retained while in Sleep mode


Question No : 7

Why is the Hardware Integration Pocket included on the HP LaserJet Enterprise M4555
MFP?

A. One unopened ream of paper can be stored in the Hardware Integration Pocket for quick retrieval when needed.
B. It allows administrators to connect third-party solutions directly to the control panel.
C. The Hardware Integration Pocket displays the current status of all the integrated hardware of the device.
D. The Hardware Integration Pocket contains a USB port that administrators can use to add third-party solutions.


Question No : 8

Which of the HP LaserJet Enterprise M4555 MFP bundles does NOT include fax
capabilities at time of purchase?

A. M4555h
B. M4555
C. M4555F
D. M4555SKM


Question No : 9

Why must customers perform a remote firmware upgrade (RFU) after replacing the
encrypted hard drive or the solid state drive?

A. The replacement encrypted hard drive and solid state drive ship without firmware. The latest version of firmware must be loaded on them after installation.
B. The firmware on the printer must be upgraded to match the firmware version on the replacement encrypted hard drive or solid state drive.
C. The USB control panel will not recognize the replacement encrypted hard drive or solid state drive until the device firmware is updated.
D. All replacement encrypted hard drives and solid state drives contain product-introduction firmware, which must be upgraded during installation.


Question No : 10

Which statement is true about the HP LaserJet Enterprise M4555 MFP HP High
Performance Secure Hard Disk?

A. The encrypted hard disk contents are deleted if a device Cold Reset is performed.
B. The encrypted hard disk is physically locked to the device using a Drive Lock Key.
C. The encrypted hard disk contents become unreadable if the disk is removed from the device.
D. The encrypted hard disk must only be installed by a qualified HP service technician.


Question No : 11

What happens if the HP 3-bin Stapling Mailbox is removed and then re-attached without
powering off the MFP?

A. The device powers off automatically.
B. A print engine firmware error occurs.
C. The device enters a Ready state.
D. The device will not power on.


Question No : 12

What is the function of the Driver Deployment Utility (DDL))?

A. It acts as a utility to provide Windows 7 support for all HP printer drivers.
B. It allows the PCL 6 driver and the Universal Print Driver (UPD) to be installed on the same device.
C. It enables the printer driver to be configured through the device Embedded Web Server (EWS).
D. It allows an administrator to create a printer driver install package for unattended installation.


Question No : 13

How many external USB host ports does the HP LaserJet Enterprise M4555 MFP have?

A. 0
B. 1
C. 2
D. 3


Question No : 14

What is true about the HP LaserJet Enterprise M4555 MFP control panel?

A. It features a USB port on the side for adding third-party solutions.
B. It is a touchscreen color display.
C. It features a built-in control-panel diagnostic utility.
D. It features a text-to-speech accessibility option (English only)


Question No : 15

A customer complains that copy jobs using the ADF have lines on the output, but copy jobs
from the flatbed look fine. What is the most likely reason this is occurring?

A. The ADF rollers are not rotating at a consistent speed
B. One or more of the LEDs used for ADF copying have stopped working.
C. The scanner is not in the correct location for ADF scanning.
D. A small amount of dirt or a smudge is on the ADF glass.


Question No : 16

Who should perform all data backup and restore procedures when the device is serviced?

A. Data backup and restore should be performed by the service technician.
B. Data backup and restore should be performed by the customer/administrator.
C. Data backup and restore should be performed remotely by HP.
D. Data backup and restore should be performed by anyone who knows how to do it


Question No : 17

Why should a used ICB never be installed in another engine?

A. Each ICB contains device-specific data which would corrupt critical saved values in another engine.
B. The ICB is hard-keyed to the device it is installed on, and attempting to install it in another engine could damage the engine or ICB.
C. The ICB installs an encrypted key on the formatter. Replacing the ICB corrupts the formatter key, necessitating a formatter replacement.
D. There is a risk that the low-voltage power supply would burn up a replacement ICB.


Question No : 18

How does the control panel connect to the formatter on the HP LaserJet Enterprise M4555
MFP?

A. The control panel connects directly to the formatter using a serial connection.
B. The control panel uses internal IPv6 addressing to connect with other components.
C. Because the control panel contains its own processor, it does not need to connect to the formatter.
D. The control panel uses a USB cable to connect to the ICB, which is connected to the formatter.


Question No : 19

What does it mean when a <Supply> Very Low message appears on the device control
panel?

A. The user must replace the specified supply.
B. The specified supply has reached the estimated end of life.
C. The specified supply is at or below 20% capacity.
D. The device will not accept any new print jobs until the specified supply is replaced.


Question No : 20

What is the best course of action when the stapler on the HP LaserJet Enterprise M4555
MFP fails?

A. Restart the device to reinitialize the stapler
B. Check the Event Log to determine the error.
C. Replace the HP 3-bin Stapling Mailbox.
D. Run a diagnostic test from the Administration menu.


Showing 1-20 of 25 Questions   (Page 1 out of 2)

Close

Close
NOVEMBER DISCOUNT: 20%

Exam-Labs PREMIUM Files

Get 20% Discount on all Exam-Labs.com PREMIUM files!



Enter Your Email Address to Receive Your 20% Discount Code

A Confirmation Link will be sent to this email address to verify your login

We value your privacy.
We will not rent or sell your email address

Close
Download Free Demo of VCE
Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.


Simply submit your e-mail address below to get started with our interactive software demo of your free trial.


Enter Your Email Address

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.